Maytag Washing Machine Error Codes

Complete Troubleshooting & Repair Guide

Detergent & Load Issues
F0E2
Oversuds Condition Detected
  • Use only HE (high-efficiency) detergent.
  • Reduce detergent amount in next wash.
  • Run rinse cycle to clear excess suds.
  • Check for detergent buildup in drum.
F0E5
Off-Balance Load Detected
  • Redistribute clothes evenly in drum.
  • Avoid washing single heavy items.
  • Pause cycle and rebalance load.
  • Check suspension system if persistent.
Control System Errors
F1E1
Main Control Board Failure
  • Power cycle the machine for 10 minutes.
  • Inspect wiring harness connections.
  • Check for moisture or burn marks on PCB.
  • Replace control board if needed.
F1E2
Motor Control Board Issue
  • Inspect inverter/control module wiring.
  • Reset appliance power supply.
  • Check for loose connectors.
  • Replace motor control board if faulty.
User Interface Errors
F2E1
Stuck Button on User Interface
  • Clean control panel surface.
  • Check for moisture or detergent residue.
  • Press all buttons to release stuck key.
  • Replace UI panel if problem continues.
Sensor Errors
F3E1
Water Level Sensor Fault
  • Inspect pressure hose for blockage.
  • Check sensor wiring connections.
  • Clean air trap tube.
  • Replace pressure sensor if needed.
F3E2
Temperature Sensor Problem
  • Test thermistor resistance.
  • Inspect heating element connections.
  • Check control board input signal.
  • Replace sensor if readings are incorrect.
Door System Errors
F5E2
Door Lock Failure
  • Check door latch alignment.
  • Inspect lock mechanism wiring.
  • Ensure door closes fully.
  • Replace door lock assembly if needed.
F5E3
Door Unlock Failure
  • Turn off power for 5 minutes.
  • Check door lock solenoid operation.
  • Inspect wiring harness.
  • Replace lock mechanism if stuck.
Communication Errors
F6E2
Communication Error Between Boards
  • Inspect wiring between control boards.
  • Check connectors for corrosion.
  • Reset machine power cycle.
  • Replace PCB if communication fails.
Motor & Drum Errors
F7E1
Basket Speed Sensor Fault
  • Check tachometer sensor wiring.
  • Inspect motor rotor for damage.
  • Test speed sensor output.
  • Replace sensor if faulty.
Water System Errors
F8E1
Low or No Water Detected
  • Check water supply valve.
  • Inspect inlet hose and filter.
  • Verify household water pressure.
  • Clean inlet screen.
F8E3
Overflow Condition
  • Check inlet valve for sticking open.
  • Inspect pressure switch system.
  • Ensure drain system is working.
  • Reset machine after inspection.
Drainage Errors
F9E1
Drain System Problem
  • Clean drain pump filter.
  • Check drain hose for blockage.
  • Inspect pump motor operation.
  • Replace pump if necessary.
Important: If the error persists after troubleshooting, disconnect power immediately and contact a certified Maytag technician.